Spray painting metal gates is a really easy way of renovating rusty metal gates. If you prepare the metal correctly spray painting them can give them a new lease of life and make them look brand new.
As part of our ongoing DIY and renovation project, one of the things that needed fixing at the front of the house was the very rusted front gate and railings. I love having the gate there and when the garden is looking pretty I think shiny black railings will look really smart. I am not sure if they are the original Victorian metal gates and railings but they are certainly the Victorian style and I want to preserve as many original features as possible. I Also didn't want to go to the expense of replacing the gates and railings so I set about making them look nice again on a budget.
How to remove rust from painted metal
The gate was very rusty indeed and had layers of rust and old paint on which I spent an hour or so scrubbing with wire wool and a wire brush to give a slightly better surface for new paint. For really stubborn rust one trick is to soak rags in vinegar and wrap them around the rusted area. Leave overnight (when it is not predicted to rain) and in the morning scrub with the wire wool or brushThis is what it looked like after a good scrub - by no means perfect but a much smoother surface to paint. If you are short on time try a chemical product such as this rust remover liquid.
How to prep metal for spray paint
Once you have removed all the rust that you can and ensured that the metal is clean and dry your metal is ready to be primed. This step isn't strictly essential but it will make your paint job last longer and hopefully prevent any further rust. I used the Jenolite anti-rust primer in grey.
I covered the areas around the gate and set about spray painting the primer.
Spray painting metal
Once the primer was dry I spray painted it black using this Hammerite aerosol. This was so easy, I just had to be careful about which way the wind was blowing. It's always windy outside our house because of the proximity to the sea but if you live in a more sheltered location you might not have to battle the wind! I did cover up the floor and wall with some old paper in case I accidentally got any spray paint on them. I held the spray can about 6 inches away from the railing and set about spray painting! It was very easy to do and took a matter of minutes. I just went up and down each side of the bars to make sure it was really well covered. The spray paint I used can be sprayed directly on rust and will help protect against any more rust too.
Make sure that you are wearing old clothes, and protective safety goggles and a mask. Trust me - if the wind blows in the wrong direction while you are spraying you will be glad of these!
I am so pleased with the results - the gates aren't new, and of course have a couple of imperfections but I love them this way and think that they look really smart now that they are a shiny black!
FAQ's
It is essential to buy a special paint for exterior metal. I find that a spray paint is quicker and gives an even coverage but you can go for a paint on version. Take a look at my recommendations for the best paint for metal gates.
It is important to try to get as much of the rust off as you can before you start painting. Although some of the paints say that they are suitable for using on top of rust, if you don't remove the rust you won't get such a smooth finish.
There is no need to seal the paint on these metal gates - in fact I have only read bad reviews about spray on sealant. The paint that you use on the gates should have a sealant included as part of the formula.
Yes, absolutely. Just make sure to rub down the surface with wire wool to create a key and clean and dry the metal thoroughly before painting.
The trick is to make sure that you clean and dry the metal well before covering with a good quality primer. Lightly sand the primer with a fine wire wool to provide a key for the paint to stick to. Hold the aerosol at least 6 inches away from the metal you are spraying and mist in fine coats. It is better to do several thin layers than fewer thick ones. The finer the coat of spray paint the less it will run.
It is also important to follow the directions on the can. Most spray paints only work well within a specific temperature range.
SHOP THIS POST
Hammerite direct to rust metal spray
Buy Now →If you liked this post about painting a metal gate share it with your friends or Pin it for later.
You might also like these home DIY posts.
Leave a Reply